My Neato was starting and stopping but it did not move.
Turned out the lidar in the tower was not spinning. You can find a guide how to fix it on YouTube. In the video he uses an old motor from a CD Player he had. If you need to buy one you might be lost. I searched a long time. You can use a "solar" motor but they might break soon again.
I replaced it with RF-300FA-12350 DVD Player Motor from ebay (3,99€).
12V, Size: 24.4 x 12.4 mm with 19.4 mm shaft.
It is important to revers polarity. I cut of the old motor from the plug and soldered the red wire to the black one.
Also if you need to replace the side brush rubber, you can use a 25 x 2 mm seal. 3,50 € for 10 pieces.
Keine Kommentare:
Kommentar veröffentlichen